ECOPOXY - LIQUID PLASTIC 2:1 (Now named Flowcast Kit)
Perfect for encapsulation or anything requiring a high level of transparency. It is non-toxic and safe and will not stress crack glass. It is also perfect for river table making or casting and see through encapsulation of objects such as coins, photos etc. With a brilliant finish; it accentuates and magnifies the objects it encapsulates.
Available as 2:1 ratio
SEE INSTRUCTIONAL VIDEO & RESIN CALCULATOR BELOW
Features: Long work time and low temperature cure.
- UV & scratch resistant, does not yellow.
- High bio-content.
- Cures to a crystal clear, water like appearance.
- Easy to use.
- Will not blush or sweat under high humidity conditions.
Working Conditions: Pot Time: 8 hours depending on ambient temperature Cure Time: 72 hours depending on ambient temperature, humidity and thickness. Set to touch: 36 hours Clean Up: Rayplex Isopropyl Alcohol or Acetone
Although they carry similar features our 2:1 will cure to a rock hard. For best results Liquid Plastic must be used at temperatures from 70-80°F. The room which you are working in should be clean, dry, dust and insect free. Settling dust can often cause blemishes on the glassy surface.