Resins
Rayplex's 8 Types of Resin Video
Corrosion Laminating Guide See Page Bottom CGSB 41 GP 22
|
General Purpose #201
Car Repairs |
Cure Speed Medium 45 to 60 Min Most Popular
|
|
|
Waterproof ISO #215 Isophathalic Grade |
Water Proof Use below the water line. Higher Strength then 201 Higher Heat Distortion Temperature.
|
|
|
VINYL ESTER #217 Chemical Resistant |
See Fabricating Standards
Guide at bottom of page.
|
|
|
Epoxy #100 Canoe / Kayak Repair Lower cost them Major Brands |
|
|
Other Resins & Tools:
Check-out our starter KITS and repair KITS below, whether its a small or big project Rayplex has you covered:
A larger repair kit for those bigger projects.
Kits Contains:
- 2 - Pairs of Latex Gloves
- 4 - 6" Mixing sticks
- 2 - 1" Chip Brushes
- 1 - 3" Roller
- 1 - 4" Spreader
- 2 - 16oz Paper Mixing Tubs
Kits Contains:
- 8 - Pairs of Latex Gloves
- 8 - 6" Mixing sticks
- 2 - 3" Chip Brushes
- 6 - 2" Chip Brushes
- 2 - 3" Roller
- 2 - 4" Spreader
- 3 - 16oz Paper Mixing Tubs
- 2 - 1L Plastic Mixing Tubs
Kits Contains:
- 2 - 32oz Plastic Measuring Tub
- 6 - 2" Chip Brushes
- 2 - 3" Chip Brushes
- 2 - 4" Chip Brushes
- 3 - 3" Roller
- 2 - 6" Spreader
- 1 - 7.5" Cage Frame
- 3 - 7.5" Roller White 10mm
- 4 - 12" Mixing Sticks
- 2 - 165oz Paper Mixing Tubs
- 3 - 128oz Paper Mixing Tubs
View our Catalyst Mixing Guide
View our Resin Information Page
| SPECIALTY CORROSION RESINS | ||
| NAME | Description | |
| Derakane/ Signa 411C | Used for resin transfer molding, centrifugal casing, and applications requiring fast wet-out. (lower viscosity version of Derakane 411) | |
| Derakane/ Signa 441-400 | Contains less styrene than Derakane 411 resins. Used for contact molding, pultrusion, matched die molding, continuous laminating, and filament winding (medium viscosity) | |
| Derakane/ Signa 470 | Offers a high resistance to solvents and chemicals, good retention of strength and toughness at elevated temperatures, and excellent resistance to acidic oxidizing environments. | |
| Derakane 8084 | Resin of choice as a primer to prepare a substrate surface for application of a corrosion resistant lining. Can be used for RTM, hand layup, spray up, filament winding and other industrial FRP applications. | |
| Derakane 510A | Designed to offer the maximum degree of fire retardance combined with enhanced chemical resistance and toughness. Fire retardance is achieved without additives, so chemical resistance is maintained and visual inspection of fabricated articles is not impaired. | |
| Derakane 510N | The preferred resin for strong oxidizers, such as chlorine and chlorine dioxide. Used extensively in FRP ductwork, stacks, and stack liner applications, equipment specified to handle mixtures of air and hot gases or potentially flammable and corrosive liquids, and flooring compounds where heat and/or fire retardance is required. Offers moderate fire retardance. | |
| Derakane 510C-350 | Designed for ease of fabrication using hand lay-up, spray-up, filament winding, compression molding, resin transfer molding techniques and pultrusion. Offers a high degree of fire retardance while providing excellent chemical resistance and toughness. | |
| Hetron 922 |
Corrosion resistant to both strong acids and bases. Inherent toughness provides fabrication advantages and resistance to both impact and thermal shock damage. Use where strong acids and bases are encountered. Meets FDA regulation Title 21 CFR.177.2420. MOQ = 80 Drums |
 |
| Hetron FR992 |
Flame resistant version of HETRON 922. Class I (ASTM E84) with the addition of 3% antimony trioxide. Use for flame resistant equipment requiring the corrosion resistance and toughness of HETRON 922 resin. MOQ = 32 Drums |
|
| Hetron 980 | Superior corrosion resistance and improved thermal properties. Use where equipment requires superior thermal properties and corrosion resistance. | |
| Hetron 92 | Flame resistant chlorendic polyester resin providing good corrosion resistance to vapors. Use for equipment handling corrosive fumes. Available in low viscosity and without Antimony trioxide. | |
| Hetron 197-3 | Highly corrosion and heat resistant. Low flame spread Class II (ASTM E84) can be achieved with the addition of FR synergist. Use where maximum corrosion and heat resistance to wet chlorine and other oxidizing chemicals is desired. Not for caustic service. | |
| Aropol 7334 |
Isophthalic Polyester resin that provides resilience and moderate heat and corrosion resistance. Use for general purpose corrosion resistant equipment. FDA versions are available. MOQ = 30 Drums |
|
| The above resins are available Drum sizes. Resins can be promoted and thixed at customer request. Please call for inquiries. 905-579-1433 | ||
