Composite mould making supplies.

Average rating:

Can$46.92 Can$53.48

Click Picture for more Info

🐝 Honey Wax® – Premium Mold Release with Maximum Payoff

Engineered with the purest grade carnauba wax and enhanced by advanced binders and spreading agents, Honey Wax® has been the go-to mold release agent in the reinforced composites industry for over 25 years. Why? Because it works—fast, clean, and reliably.

💡 What’s in it for you:

Save Time: Spreads faster and buffs easier than other waxes—cutting down on labor hours.
Get More Pulls: Creates a tough, abrasion-resistant film that lasts through multiple releases.
Achieve Flawless Results: Delivers high gloss and precise detail reproduction every time.
No Stains, No Hassle: Leaves behind a clean, hard-releasing surface that won’t mark your molds.
Boost Performance with PVA: Pairs perfectly with PVA for superior release characteristics.

🛠️ Application Tips:

For new molds, apply four coats for best results.
Start with two coats, buff off excess, let stand for an hour.
Finish with two more coats to allow solvents to evaporate and strengthen the wax barrier.

📦 Size: 14 oz 🔧 Part #: 55054

Check out the YouTube video

Don't forget the PVA for extra safety

PVA Mold Release – Smooth, Simple, and Stress-Free

Get that flawless part release every time—without the sticking, stress, or cleanup headaches. With just three quick mist coats over your waxed, nonporous mold, PVA creates a silky, glass-like barrier that feels as good as it looks.

In minutes, it’s dry and ready, giving you the confidence your part will separate cleanly and your finish will be smooth and professional. When the job’s done, the residue rinses away easily with water—leaving nothing but your perfect work.

Bonus: spray it over polyester repairs for a tack-free cure that keeps your process moving. Size: 1L Part #: 55422

https://www.rayplex.ca/product467.html

Application videos using PVA.

PVA application @ 9:40 PVA application @ 8:35

55054

Honey Wax PLUS HIGH TEMP Wax

Can$62.55 Can$68.81

Click Picture for more Info

A high-temperature version of Honey Wax formulated to work with higher exotherm resins up to 240°F. Honey Plus Wax is an excellent release agent where reproducibility, hi-gloss, non-staining, and a hard releasing film is important. It is easier to apply than our other wax release agents and the residual film is durable and resistant to abrasion.

55070

Honey Wax 250

Can$37.71 Can$41.48

Click Picture for more Info

Our easiest to use premium carnauba based mould release, agent. Works well in both cold and warm temperatures. Honey Wax® 250 reduces cycle times due to its exceptional ease of application and buffing. It is an excellent mould release agent providing reproducibility, high gloss, and a non-staining, hard releasing film which are important to the fabricator.

55060

Miracle Gloss Maximum Mold Release Wax NO. 8 3.0

Can$47.55 Can$52.31

Click Picture for more Info

55010

HONEY WAX RELEASE AGENT CASE

Can$518.40 Can$554.69

Click Picture for more Info

Compounded with the purest grade carnauba wax, plus special binders and spreading agents, Honey Waxx has been the leading choice in mold release agents for decades......

55054

Average rating:

PATTERN SEALER 946mL

Can$29.31

Click Picture for more Info

The purpose of pattern sealer is to seal the porous surface of the pattern.

63522

PATTERN SEALER 3.78L

Can$84.62

Click Picture for more Info

The purpose of pattern sealer is to seal the porous surface of the pattern.

63526

PVA 250 ML

Can$11.43 Can$14.20

Click Picture for more Info

PVA should be used to aid in the release of parts from a mold. It should be applied in three thin mist coats over...

Application videos using PVA.

PVA application @ 9:40 PVA application @ 8:35

Polyvinyl alcohol (PVA) is often utilized as a mold release agent in industries such as plastics, rubber, and composites. Here's how it works:

Coating: PVA can be applied as a thin film or coating onto the surface of a mold or other surface where sticking might occur.
Barrier: Once applied, the PVA forms a barrier between the surface and the material being molded or worked with, preventing adhesion.
Water Solubility: PVA is water-soluble, which means that after the molding process is complete, the PVA can be easily washed away with water, leaving behind the molded object.
Smooth Finish: PVA can also contribute to a smoother surface finish on the molded object, as it helps in preventing imperfections caused by sticking.

It's important to note that while PVA can be effective as a release agent in certain applications, its performance depends on the specific materials, processes, and conditions involved. For other applications, different types of release agents might be more suitable. Always ensure to test the compatibility and effectiveness of any release agent in your specific use case before widespread application.

Honey wax is great wax that won't cause PVA to bead up

🐝 Honey Wax® – Premium Mold Release with Maximum Payoff

Engineered with the purest grade carnauba wax and enhanced by advanced binders and spreading agents, Honey Wax® has been the go-to mold release agent in the reinforced composites industry for over 25 years. Why? Because it works—fast, clean, and reliably.

💡 What’s in it for you:

Save Time: Spreads faster and buffs easier than other waxes—cutting down on labor hours.
Get More Pulls: Creates a tough, abrasion-resistant film that lasts through multiple releases.
Achieve Flawless Results: Delivers high gloss and precise detail reproduction every time.
No Stains, No Hassle: Leaves behind a clean, hard-releasing surface that won’t mark your molds.
Boost Performance with PVA: Pairs perfectly with PVA for superior release characteristics.

🛠️ Application Tips:

For new molds, apply four coats for best results.
Start with two coats, buff off excess, let stand for an hour.
Finish with two more coats to allow solvents to evaporate and strengthen the wax barrier.

📦 Size: 14 oz 🔧 Part #: 55054

Check out the YouTube video

55414

PVA LIQUID - 1L

Can$30.35 Can$34.59

Click Picture for more Info

PVA should be used to aid in the release of parts from a mold. It should be applied in three thin mist coats over...

Application videos using PVA.

PVA application @ 9:40 PVA application @ 8:35

Polyvinyl alcohol (PVA) is often utilized as a mold release agent in industries such as plastics, rubber, and composites. Here's how it works:

Coating: PVA can be applied as a thin film or coating onto the surface of a mold or other surface where sticking might occur.
Barrier: Once applied, the PVA forms a barrier between the surface and the material being molded or worked with, preventing adhesion.
Water Solubility: PVA is water-soluble, which means that after the molding process is complete, the PVA can be easily washed away with water, leaving behind the molded object.
Smooth Finish: PVA can also contribute to a smoother surface finish on the molded object, as it helps in preventing imperfections caused by sticking.

It's important to note that while PVA can be effective as a release agent in certain applications, its performance depends on the specific materials, processes, and conditions involved. For other applications, different types of release agents might be more suitable. Always ensure to test the compatibility and effectiveness of any release agent in your specific use case before widespread application.

Honey wax is great wax that won't cause PVA to bead up

🐝 Honey Wax® – Premium Mold Release with Maximum Payoff

Engineered with the purest grade carnauba wax and enhanced by advanced binders and spreading agents, Honey Wax® has been the go-to mold release agent in the reinforced composites industry for over 25 years. Why? Because it works—fast, clean, and reliably.

💡 What’s in it for you:

Save Time: Spreads faster and buffs easier than other waxes—cutting down on labor hours.
Get More Pulls: Creates a tough, abrasion-resistant film that lasts through multiple releases.
Achieve Flawless Results: Delivers high gloss and precise detail reproduction every time.
No Stains, No Hassle: Leaves behind a clean, hard-releasing surface that won’t mark your molds.
Boost Performance with PVA: Pairs perfectly with PVA for superior release characteristics.

🛠️ Application Tips:

For new molds, apply four coats for best results.
Start with two coats, buff off excess, let stand for an hour.
Finish with two more coats to allow solvents to evaporate and strengthen the wax barrier.

📦 Size: 14 oz 🔧 Part #: 55054

Check out the YouTube video

55422

Average rating:

PVA LIQUID 4L

Can$108.00 Can$123.12

Click Picture for more Info

PVA should be used to aid in the release of parts from a mold. It should be applied in three thin mist coats over...

Application videos using PVA.

PVA application @ 9:40 PVA application @ 8:35

Polyvinyl alcohol (PVA) is often utilized as a mold release agent in industries such as plastics, rubber, and composites. Here's how it works:

Coating: PVA can be applied as a thin film or coating onto the surface of a mold or other surface where sticking might occur.
Barrier: Once applied, the PVA forms a barrier between the surface and the material being molded or worked with, preventing adhesion.
Water Solubility: PVA is water-soluble, which means that after the molding process is complete, the PVA can be easily washed away with water, leaving behind the molded object.
Smooth Finish: PVA can also contribute to a smoother surface finish on the molded object, as it helps in preventing imperfections caused by sticking.

It's important to note that while PVA can be effective as a release agent in certain applications, its performance depends on the specific materials, processes, and conditions involved. For other applications, different types of release agents might be more suitable. Always ensure to test the compatibility and effectiveness of any release agent in your specific use case before widespread application.

Honey wax is great wax that won't cause PVA to bead up

🐝 Honey Wax® – Premium Mold Release with Maximum Payoff

Engineered with the purest grade carnauba wax and enhanced by advanced binders and spreading agents, Honey Wax® has been the go-to mold release agent in the reinforced composites industry for over 25 years. Why? Because it works—fast, clean, and reliably.

💡 What’s in it for you:

Save Time: Spreads faster and buffs easier than other waxes—cutting down on labor hours.
Get More Pulls: Creates a tough, abrasion-resistant film that lasts through multiple releases.
Achieve Flawless Results: Delivers high gloss and precise detail reproduction every time.
No Stains, No Hassle: Leaves behind a clean, hard-releasing surface that won’t mark your molds.
Boost Performance with PVA: Pairs perfectly with PVA for superior release characteristics.

🛠️ Application Tips:

For new molds, apply four coats for best results.
Start with two coats, buff off excess, let stand for an hour.
Finish with two more coats to allow solvents to evaporate and strengthen the wax barrier.

📦 Size: 14 oz 🔧 Part #: 55054

Check out the YouTube video

55426

PVA LIQUID 20 L

Can$235.55 Can$266.17

Click Picture for more Info

PVA should be used to aid in the release of parts from a mold. It should be applied in three thin mist coats over...

Polyvinyl alcohol (PVA) is often utilized as a mold release agent in industries such as plastics, rubber, and composites. Here's how it works:

Coating: PVA can be applied as a thin film or coating onto the surface of a mold or other surface where sticking might occur.
Barrier: Once applied, the PVA forms a barrier between the surface and the material being molded or worked with, preventing adhesion.
Water Solubility: PVA is water-soluble, which means that after the molding process is complete, the PVA can be easily washed away with water, leaving behind the molded object.
Smooth Finish: PVA can also contribute to a smoother surface finish on the molded object, as it helps in preventing imperfections caused by sticking.

It's important to note that while PVA can be effective as a release agent in certain applications, its performance depends on the specific materials, processes, and conditions involved. For other applications, different types of release agents might be more suitable. Always ensure to test the compatibility and effectiveness of any release agent in your specific use case before widespread application.

55430