ChemTec Products
CHEM-100 is a solvent-less, low VOC, two component epoxy coating system. It exhibits very good appearance and chemical and physical properties. This system complies with the Canadian Food Inspection Agency (CFIA)
| Recommended Thickness | Primer Finish Coat 6-8 mils 8-12mils |
| Mileage per gallon (8 mils thickness) | 200 ft2 |
| Mileage for Slurry Application (50% Silica Sand) (12 mils thickness) |
125 ft2 |
| Mileage for Trowel Epoxy Application (85% Silica Sand) (24 mils application) |
60 ft2 |
| Shelf Life | 12 months in original unopened factory sealed containers. Keep away from extreme cold, heat or moisture. Keep out of direct sunlight and away from fire hazards |
| Mix Ratio, by volume | A: B-2:1 |
| Solids Content | 100% |
| Coverage | A:B=75 - 600 P.C. |
| Pot Life (454 g) | 15-20 minutes |
| Working Time | 35 minutes |
| Tack Free | 12 hours |
| Pedestrian | 24 hours |
| Traffic | 48 hours |
Transform ordinary spaces into extraordinary works of art with CHEM-DESIGN epoxy resin. Perfectly engineered to bring your creative vision to life, this premium product combines ease of use with professional-grade results.
Key Features:
- Superior Quality: Crafted for consistent, flawless finishes.
- Optimized Mix Ratio: 2:1 formula for easy application.
- Flexible Working Time: 45-minute open time to perfect every detail.
- Efficient Drying: Cures in just 16 hours for quick project turnaround.
- Ample Coverage: Comes in a convenient 3-gallon size.
Ideal for creating stunning metallic floors or other artistic designs, CHEM-DESIGN is the trusted choice for professionals and DIY enthusiasts alike. Don’t settle for ordinary—choose excellence for your next masterpiece!
The CHEM-EXTENDER is a synthetic, fluffy, dried polyethylene fiber. It is non-hazardous, resists to mold and biological growth and is intended as a thickening agent for epoxy coatings.
The CHEM-EXTENDER is intended to be combined to the epoxy resin and mixed up until the desired level of Thixotropy is obtained. It is used in various applications to treat cracks and joints, minor repairs and improve their dimensional stability of vertical applications.
The CHEM FILLER FC is a two-component epoxy gel crack treatment and repair system that is VOC-free, 100% solids (solvent-free), and odorless. The product is easy to use and can be easily applied to horizontal and vertical surfaces. CHEM FILLER offers a short working time and hardens very quickly, allowing the application of the base coat or the primer a few minutes after the application of the CRACK FILLER EPOXY GEL. This product has superior mechanical and chemical properties suitable for commercial and industrial applications. The formulation is based on high-performance cycloaliphatic polyamine technology displaying exceptional properties.
| Mix Ratio, by volume | A: B = 2:1 |
| Solids | 100% |
| Working Time | 20 minutes |
| Viscosity | Gel |
Elevate your projects with CHEM-1000 PG, the advanced polyaspartic coating system designed for maximum durability and efficiency. Featuring POLY-GUARD TECHNOLOGY, it’s built to withstand tough conditions while delivering flawless results.
Key Features:
- 85% Solids Polyaspartic Formula: Durable, high-performance coating.
- Easy 1:1 Mix Ratio: Simplifies application.
- 25-Minute Working Time: Flexible for detailed work.
- Fast 2-Hour Dry Time: Accelerates project completion.
- Low Odor: Ideal for indoor applications.
For unbeatable protection and superior hardness, CHEM-1000 PG is the trusted choice for professionals. Choose the best—choose CHEM-1000 PG for your next project!
CHEM 1000 ST is a 93% solids polyaspartic coating engineered for superior toughness, durability, and ease of application. Designed for professional-grade performance, this high-solids formula ensures a resilient, long-lasting surface with outstanding coverage and workability.
- Unmatched Durability – High 93% solids content provides a tougher, more resilient surface.
- Extended Working Time – Allows for smooth, seamless applications.
- Higher Dry Film Thickness – Ensures superior coverage with fewer coats.
- Effortless Application – Formulated for a flawless, professional-grade finish.
- Convenient 3-Gallon Kits – Designed for efficient use in any project.
- 2:1 Mix Ratio – Ensures optimal performance and reliability.
Ideal for commercial, industrial, and residential applications, CHEM 1000 ST delivers the strength and longevity needed for high-traffic environments while maintaining an exceptional finish.
CHEM-1000 WT is a two-component, 85% solids polyaspartic floor coating system engineered for exceptional performance and durability. With its prolonged working time and faint odor, it’s ideal for applications requiring precision and top-tier results.
Key Features:
- 85% Solids Formula: Delivers a durable, high-quality finish.
- Extended Work Time: Allows for meticulous application.
- Outstanding Appearance: Creates a seamless, professional-grade look.
- Superior Resistance: Excellent protection against chemicals, UV rays, and solvents.
- Low Odor: Suitable for indoor use and sensitive environments.
Choose CHEM-1000 WT for a flawless floor coating that stands the test of time, offering both aesthetic appeal and robust protection.
| Volumetric Ratio: | 1A:1B | |
| Solids Content: | 85% | |
| *Coverage: | 75 - 200 P.C. | |
| Application Temperature: | 65-90°F (18-32°C) | |
| Min Substrate Temperature: | 50°F (10°C) | |
| Max Substrate Temperature: | 86°F (30°C) | |
| Thinner: | Not required | |
| Pot Life @ 21ºC: | 5 minutes | |
| **Drying / Curing Time : | ||
| Working Time: | 25 minutes | |
| Tack Free: | 2.5 hours | |
| Pedestrian: | 4-6 hours | |
| Traffic: | 12 hours | |
| Curing Time @ 21ºC for resurfacing: | 24 hours | |
| Shelf Life: | 12 months | |
| USDA Food & Beverage & CFIA: | Meets the requirements |
CHEM PROOF RAPID™ is 100% solids, 0 VOC, two-component epoxy resin-based primer specifically designed as a moisture barrier for concrete floors with very high residual moisture prior to laying floor coverings, coatings, or parquet.
| Mix Ratio, by volume | A: B-2:1 | ||
| Solids Content | 100% | ||
| Pot Life (100 g @ 25 °C) | 5 minutes | ||
| Working Time | 15 minutes | ||
| Tack Free | 2-3 hours @ 21 °C (70°F) | ||
| Pedestrian | 12 hours @ 21 °C (70°F) | ||
| Traffic | 24 hours @ 21 °C (70°F) |
CHEM-PROOF SC is a high-performance, 100% solids, 0 VOC, two-component epoxy primer specifically engineered to combat excessive moisture in concrete floors. Ideal for use beneath floor coverings, coatings, or parquet, it handles up to 25 lb./24 hr./1000 ft² of residual moisture.
Key Features:
- Moisture Barrier: Designed for concrete floors with high moisture levels.
- Extended Work Time: 30 minutes at 68°F for precise application.
- Slow Cure: Cures in 150 minutes, offering excellent control and performance.
- Versatile Application: Use as a base coat or standalone finish.
Choose CHEM-PROOF SC for reliable moisture protection and stunning, durable results. Perfect for projects demanding quality and long-lasting performance.
CHEM WB 2K is specially formulated for commercial floors.
Two-component coating offers supreme resistance. CHEM WB 2K enhances the beauty of wood surfaces and existing coated floors and offers outstanding resistance to UV over time.
In addition, the CHEM WB 2K has great mechanical and chemical properties, making it an ideal choice for residential and commercial applications. The product provides a very long working time which facilitates application. The CHEM WB 2K is self-priming thus, no need for an additional primer. The formulation of CHEM WB 2K is based on the most recent technological advances providing excellent properties and an impeccable aesthetic finish. CHEM WB 2K protects and seals your wood floors or any other Epoxy coating surface. Clear coating offers supreme resistance, and a perfect solution to add value to your floors.
| Sheen Rate (60°): | Gloss (90%) Satin (25%) Matte (5%) |
| Odor: | Slight odor / non-inconvenient |
| Coverage: | Up to 165 pi² (15 m²) / L |
| *Drying time: | |
| Touch: | 1 Hour |
| Cover: | 3 - 4 Hours |
| Light traffic: | 4 Hours |
| Furniture: | 24 Hours |
| Fully Cured: | 7 Days |
| Duration of catalyzed mixture: | 12 Hours |
| Chemical resistance: | Excellent |
| Mass loss at Taber test: | 8 mg (ASTM D4060 with abrasive wheel CS-17) |
| Flashpoint: | N.D. |
| Solid content: | 30% (Weight) - 27% (volume) |
| Working Time | 25 minutes |
| pH: | 8,2 ± 0,4 |
| VOC content: | 272 g/L |
| Viscosity: | 23 à 25 Seconds (Zahn #2) |
| Density: | 1,04 - 1,05 kg/L |
| Freezing stability and thaw: | Fears frost |
| Lifespan: | 12 months (when stored in the original container) |
| tools Cleaning: | Water |
| Storage: | Between 10°C & 30°C (50°F et 85°F) |
| Disposal: | Recycle if possible (See your local authorities) |
| USDA / FDA / CFIA: | Meet the standards |
