CABOSIL
A white, free-flowing powder, Cabosil is a thickening agent primarily added to resin to prevent run-off and sags on vertical surfaces.
- Use with an epoxy to produce extremely hard, solid parts, perfect for structural bonding, filling, and filleting.
- Use in conjunction with chopped glass fiber for added strength for parts.
- Silica-filled resin can be difficult to sand. Consider using #705 Q-Cell for areas that require sanding.
This filler is compatible with epoxy, polyester, and vinyl ester resin systems. Add filler after adding catalyst to resin.
Mix ratio is 1:2 (filler to resin by volume) for general use, 1:3 (filler to resin by volume) to reduce runs/sagging.
Average rating:
CABOSIL 1L
Can$15.40
This thickening additive is used to control the viscosity of the resin to prevent runoff in vertical and overhead joints.
72522
Average rating:
CABOSIL 3.78L
Can$33.50
This thickening additive is used to control the viscosity of the resin to prevent runoff in vertical and overhead joints.
72526
CABOSIL 20L72530
Can$234.68
This thickening additive is used to control the viscosity of the resin to prevent runoff in vertical and overhead joints.
CABOSIL 10KG BAG72540
Can$520.00
Call for shipping cost on this item) This thickening additive is used to control the viscosity of the resin to prevent runoff in vertical and overhead joints
