G830 2.0 Gelcoat Spray Gun

Features are:

  • The 2.0 mm nozzle is perfect for gelcoat and resin.
  • This gun excels at surface touch-ups such as mold repair, composite refinish and delicate boat hull repair.
  • There are separate adjustments for spray pattern width and material volume.
  • With gelcoat, you will need a 2.0 tip or bigger to be able to spray it.

Smaller nozzle kits are available in 0.8 mm, 1.0 mm, and 1.2 mm.

Blue die cast body ensures long life. Most small touch-up guns are designed with a flat seal just behind the threads that the air cap attaches to.

Our model G830 is a one piece casting, eliminating this problem seal. If you have used other similar spray guns and cleaned them in acetone, the seals disintegrate. Our G830 can be cleaned in acetone without this problem.

Our economical replacement parts and nozzle kits make this a perfect addition to any composite shop.

Parts Breakdown 



G830 2.0 Gelcoat Spray Gun | No reviews for this product.


| No reviews for this product.