Banner1000

PLASTIC MEASURING TUBS 64 OZ (2.5 QT) 50/Case


PLASTIC MEASURING TUBS 64 OZ (2.5 QT) Case Quantity

Features include:

  • Containers are resin and chemical safe
  • Containers have flat bottoms for easy mixing
  • Graduations are provided in both ounce and metric measurements right on the container
  • Measurements go up to 64oz or 2qt or 2litres
  • Various ratio’s available right on the container
  • Containers are solvent-resistant and can be used with paints, pastes and adhesives
  • Reusable and recyclable
  • Transparent so you can see liquids
  • Especially helpful for mixing epoxy resin and polyurethane foam 

Plastic Tubs are reusable. After the resin cures just squeeze the tub and the resin will break away from the tub.

PLASTIC MEASURING TUBS 64 OZ (2.5 QT) 50/Case | No reviews for this product.
Can$190.10
Quantity

How to Use

Mix’n Measure Instructions: 1. Find a ratio you’ll need for the product you’re using (3:1:1, 4:1:1, 8:1:1 etc) 2. Decide how much you need to mix. Use the oz and ml on the side to help determine which number to follow. Visually trace it around to the mixing ratio chart you need. Example: if you need little mixture follow the #1’s in each column. If you need to mix more follow the larger number in each column. 3. Let’s say we are using the #4’s. In the first column pour to the first #4 mark, the second ingredient you will fill to the middle #4, third ingredient goes to the third column #4 mark on the scale. If the mixture is only two parts 3:1, use the scale that says 3:1:1 the last number doesn’t matter when mixing only two parts. If the cup doesn’t have the right ratio on the side, you will have to use the simple Oz’s or mL on the side. Remember “parts” are simply equal parts. Example: 4:2:1 = 4 parts to 2 parts to 1 part = a 7part mixture 8:1:1 = 8 parts of water to 1part solution and another 1part solution = 10 parts (8+1+1)

Reviews

  
| No reviews for this product.