Search

SECRETS OF PATTERN PREP

Learn the secrets of pattern preparation and mould making

from Dr. Ray

MOULD BUILDING

Learn the steps to mould building.

Tooling Gelcoat 3.78L TOOLING GELCOAT 3.78L BR
Can$125.22
31026 Quantity
TOOLING RESIN 3.78L TOOLING RESIN 3.78L
Can$90.53
21626 Quantity
Sanding Sealer 1 L PATTERN SEALER 1L
Can$29.31
63522
The purpose of pattern sealer is to seal the porous surface of the pattern. This provides a smoother surface to...
Quantity
Sanding Sealer 3.78 L PATTERN SEALER 3.78L
Can$84.62
63526
The purpose of pattern sealer is to seal the porous surface of the pattern. This provides a smoother surface to...
Quantity
HONEY WAX 14 OZ HONEY WAX RELEASE AGENT WAX
Can$26.50
55054

Compounded with the purest grade carnauba wax, plus special binders and spreading agents, Honey Waxx has been the leading choice in mold release agents for decades....

Check out the YouTube video


Quantity
HONEY WAX 14 OZ Case HONEY WAX RELEASE AGENT CASE
Can$0.00
55054
Compounded with the purest grade carnauba wax, plus special binders and spreading agents, Honey Waxx has been the leading choice in mold release agents for decades......
Quantity
TR 104 HIGH TEMP WAX TR 104 HI TEMP WAX
Can$38.29
55055

TR 104 HI TEMP WAX *** OUT OF STOCK ***


Quantity
TR 216  HIGH TEMP LIQUID MOLD RELEASE 3.78L TR216 High Temp Liquid Wax 3.78L
Can$72.52
55058

A high temperature liquid mold release wax formulated for increased production efficiency on well conditioned FRP tooling and other hard surface molds.


Quantity
PVA  250 ML PVA 250 ML
Can$8.61
55414
PVA should be used to aid in the release of parts from a mold. It should be applied in three thin mist coats over...
Quantity
PVA  1L PVA LIQUID - 1L
Can$20.23
55422
PVA should be used to aid in the release of parts from a mold. It should be applied in three thin mist coats over...
Quantity
PVA  4L PVA LIQUID 4L
Can$52.74
55426
PVA should be used to aid in the release of parts from a mold. It should be applied in three thin mist coats over...
Quantity
PVA  20L PVL LIQUID 20 L
Can$142.55
55430
PVA should be used to aid in the release of parts from a mold. It should be applied in three thin mist coats over...
Quantity
4 inch Wedge 4 x 1.25 x 3/8" Plastic Wedge
Can$2.29
65120
These wedges are a must for removing parts from fibreglass composite moulds. You will save countless hours of mould...
Quantity
6 inch Wedge 6 x 2.25 x5/8" Plastic Wedge
Can$3.91
65123
These wedges are a must for removing parts from fibreglass composite moulds. You will save countless hours of mould...
Quantity
10 Inch Wedge 10 x 3.125x1" Plastic Wedge
Can$7.65
65121
These wedges are a must for removing parts from fibreglass composite moulds. You will save countless hours of mould...
Quantity
LBMM9 Learn the Steps of Mold Making
Can$0.00
61145

Gary Murcott takes you step by step through the complete mould making process of creating...

Click the Link below

https://www.youtube.com/watch?v=wRZaKmBJNK4


View our professional HOW TO videos on

$$ We’ll match any competitor's price either online or retail store $$

 Rayplex Ltd. 341 Durham Crt. Oshawa, Ontario, Canada L1J-1W8
PH (905) 579-1433 FX (905) 579-1431
Open to the Public: Monday to Friday - 9 am. to 5 pm. E.S.T.
E-Mail info@fibreglass.com      https://www.rayplex.ca
Copyright © 2017 Rayplex Ltd.      RAYPLEX is a registered Trade Mark All rights reserved.
Click here for directions to our store